MP-M Memory Board

The MP-M Memory Board is a 5 1/2 inch x 9 inch board with a total storage capability of 4,096 words of 8 bit random asscess memory. The kit, however, is supplied with only half (2,048 words) of it's memory capacity. To bring the board to maximum capacity, you must purchase the MP-MX memory expansion kit. The circuitry on the board provides all of the address decoding and data line buffering to handle a total of 32 (1K bit x 1 bit) 2102 type static random access memories. All interconnections to the system are made via a 50 pin connector to the Mother Board (MP-B). +5 volt power for the board is supplied by a on board regulator with heatsink for each 2,048 words of memory. Current consumption is approximately 0.75 A for every 2,048 words of memory.

The system could have 4 boards for a total of 16K bytes. This drew 6 amps of 5 volts.

Introduced by Southwest Technical Products Corporation in 1975. The MP-M kit cost $80 and the MP-MX cost $45.

Board Photo (55K JPG)

Board Photo High Resolution (388K JPG)

MP-M Assembly Instructions (160K PDF)

MP-MX Assembly Instructions (160K PDF)

Schematic (409K PDF)

The MP-M (and MP-8M) can be modified for operation above 32K. See the MP-A2 Assembly Manual for details (page 9.)

Michael Holley's SWTPC Collection Home Page